2 шт. 10 мл металлический клей для дерева и пластика быстросохнущий клей эпоксидные А в красный зеленый резина эпоксидный прозрачный клей

Description:

100% brand new and high quality.
Applicable to the rapid repair of automobiles, tractors and motorcycle cylinders,
Fuel tanks, bushings, etc .; emergency repair of transformers and other electrical equipment;
Various oil and tubing leakage repair; various products of the adhesive assembly and thin
Material Structural strengthening; nameplate, signboard, logo and decorating ornaments
Bonding; daily necessities repair and bonding.
Specifications:
Material: Glue
Color: Red and green
Capacity: Approx10ML+10ML
Instructions:
Treatment, just sandpaper grinding without degreasing, according to the
visual A: B = 1: 1 ratio after mixing can be coated on both sides were coated
or single-sided overlap after coating, room temperature finger pressure 3-8
minutes curing positioning , 30-60 minutes to reach 70% of the final strength,
24 hours after the highest strength, shear strength> 20 MPa (200 Kg / cm 2).
Can be used in -60 ~ 120 degrees environment.
How To Use :
Make sure the bonding face clean;
Mix A (resin) and B(curing agent) in a glass ware or plastic
ware(if cold weather,better heat to 10~20degree);
Gelatinize equably,slick it smooth,overlap and press or use tongs,
ribbon for fixation,wipe off the remnant.
At normal temperature,it will congeal in 1 hour, it can be used after 24 hours.
(If want to accelerate solidification, heat properly. At 60degree,it will congeal in 15mins.)
Package Included:
1 Set of AB Glue
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.